Very happy with how the installation turned out. I let my garage install the wiring in the wiring harness of the bike and the rest I did myself. It is a straightforward installation but you need to take your time for the install. The camera's are good quality so is the rest and the image quality in good/bad/dark environments exceeds expectations. In General very happy with this purchase. Side note, for the installation of the rearview camera I made a hole in the body work in order to have the cable stowed away nicely, this hole was then filled with silicone so no water/dirt can enter this was.
The system works as advertised. It is easy to install. Routing the wires takes most of the install time. The unit is nice and compact. Warning is okay, although I would prefer the warnings a bit earlier. Esp at low speed difference I find the safety space a bit on the low side. The supplied tape to fix the mirror lights is very weak. The tape did not secure the warning lights at speeds over 100k.
This is mounted on an FJR 1300. I have a Mounting rail above the instrument panel to bring the GPS int the field of view. I printed mounts for the indicators at the ends of the rail. This brings them into the lower scan view. The installation was easy, the power coming from a distribution block. The rear radar unit is mounted on the license plate rail on the left side (the INNOVV dash camera is on the right side. The performance is exactly as stated monitoring targets for relative closing speed. The alerts are appropriate. In higher density traffic and stopped traffic you can keep your eyes forward and be aware of changes behind. It only needs to help you once to be worth it.
Very pleased with the quality of the K7 that has been fitted to my BMW 1250GSA. But ….. such a high end camera system needs a good solid reliable App, this doesn’t have it. I shouldn’t have to go into airplane mode or switch off mobile data just to access it and the update process with only using a 32gb TF card is tedious and time consuming. It should update automatically upon connection, that’s if you can connect to the App in the first place ! Please please please INNOVV. Get it sorted