Video laden:

Für Erstnutzer

Installationsanleitung

Eine Schritt-für-Schritt-Videoanleitung zur Einrichtung Ihres Produkts und für einen reibungslosen Betrieb.

You might want to know

Google Play Store

Scan or click to download INNOVV App from Play Store

Download App

Apple Store

Scan or click to download INNOVV App from Apple Store

Download App

RC6 Manual

Click to download the product manual

Download

K6 Firmware Version

IK6.20231107.V1.0.01
Download

Changelog:

1. Support for 28 frames video selection.

2. Adjust gravity trigger sensitivity.

How To Update RC6 Dashcam's Firmware

1. Copy the firmware (INNOVV K6.bin) to the root of TF card.*8GB and 32GB TF cards should be formatted into FAT32 in advance.

2. Insert the TF card in the DVR then turn on the camera by long pressing the button, the red light will flash at low light, stop pressing the button and wait for a few moments till the updating finishes, the RC6 will automatically turn on after the updating, and the firmware in the card will be deleted as well.(*Important: the power should not be cut off during this step)

Häufig gestellte Fragen

The camera is shaking during riding, and the videos are jittery.

Please check if the camera is parallel to the ground and confirm if the screws are tightened enough.

The video is blurry.

Please check if the lenses are clean without any finger marks, dust or other smudges, and wipe the lenses with dust-free cloth.

The DVR is not working after motorcycle ignition is on.

Please check the yellow ACC wire is connected correctly.

The RC6 fails to record and the red light is flashing.

Please check if the TF card is inserted properly or select another TF card and try again.

The RC6 Wi-Fi can not be found.

Please check whether the green light on the DVR is blinking or not, please press the button twice for a short time to activate the Wi-Fi if you find the green light is not on.

Forget the password of the INNOVV Wi-Fi.

Please reset the DVR to the default setting. The default password is 12345678.

There is no audio in the video.

1. Please check if the microphone is off in the App settings.
2. Please check if the microphone input hole in the DVR is blocked or not.

Video froze when it is played or downloaded in the App.

1. The distance between your phone and the camera should be within 2m, and be sure there is no obstacle or interference sources around.
2. You are suggested to operate the App on a mainstream mobile phone to get a better experience.

The indicator lights do not come on after turning on the ignition.

Please check that the wires are connected correctly and firmly, and please check whether the connector is loose or the wiring harness is damaged.

No warning alert sound.

Please confirm that the buzzer is not blocked on the control box.