Système INNOVV ThirdEYE BSD (version miroir)

After you have it you will never want to be without it anymore. Excellent quality at first touch. Tough and resistant to all weather conditions and working perfectly.

I have installed it as best as i can. The radar works wonderfully and it helped me a lot with just knowing your surroundings a bit better. Nothing beats the Head Check but it helps to get reminded to do it from time to time. i have an XSR 900 it is quite a head ache fitting it to the bike cleanly specially the wiring and installing it together with the K7 but 5 stars still

He recibido el producto y lo he instalado en mi motocicleta KOVE 800 xPRO de manera muy simple. ya lo he probado y resuelve muy bien los Falsos Positivo. Solo indicando la aproximación y cambio de carril

Easy to install, looks good and works very very well

I had this installed today. I love it. I replaced a BSD system made by Aoocci, it was a pos. I ride in Bangkok and the 3rd Eye Blind System performed above expectations on one of the busiest streets in Bangkok. It also detected people walking behind the bike. Great Job Innovv. Thank you

It works…

Heavy duty well working, well designed must have for your bike.

Genial..! Simplemente genial.
Funciona muy bien y es algo que todos deberíamos instalarnos en la moto.
Ya me ha evitado más de un susto.
Muy muy satisfecho con este producto.

El producto te llega en una caja con muy buena presentación, el material es de alta calidad, la longitud de los cables: (Para una Benelli TRK 702) algo justos con las luces de los espejos, y cable de sobra para el radar, esta moto no te deja mucho hueco, y el que tiene es algo atrás. No ocupa apenas lugar la centralita, eso sí la madeja de cables la tienes que guardar, pero en absoluto se hace engorroso. La instalación super-fácil, cualquiera puede instalarlo, recordar quitar el film protector del radar cuando lo instaléis y coger los cables con bridas.

I installed the ThirdEye on my 2020 Harley Street Glide, and I've ridden with it for a few months. It works as described. It is an aid and does not replace safe riding habits. When cars are overtaking or passing the bike at usual highway speeds, the alert lights up just as the car disappears from the mirrors. If the car is approaching more rapidly, the light goes on sooner, when the car is farther back. You can usually hear the road noise of the overtaking car at the same time as the alert lights up. The light stays on if two cars are passing one right after the other, and you might not be aware, so this is an example of where it is helpful.

There are three parts to installation-- the indicators (alerts), the radar, and connection to power. I tried to install it as cleanly as possible.

I installed the indicators on the master cylinders. I removed the outer fairing, the tank console and the tank. I taped the end of the wire to a length of weed wacker line and threaded it under the handlebar into the inside of the front fairing. I left a little slack to allow the handlebar to turn and then routed the wires out onto the top frame member and into the wire trough under the tank. The wires end up in the top caddy under the seat.

I mounted the radar to the docking assembly. I replaced the docking screw with a 1/4 x 20 x 3/4" socket head screw + washer. I threaded the wire inside the docking assembly, then behind the shock, then through the hole in the inside of the fender to the top caddy. Tie the wire to the frame behind the left side over so that it does not rub against the rear tire.

The power lines go to the available 3-way Molex connector behind the right-side cover. You need a male Molex connector 21200323, male terminal pins 21200342 and a connector plug 21200340. Crimp a length of 20 g wire onto each terminal. I used the Engineer PA-21, slot 2.2 for the conductor crimp and the generic crimper, slot "C" for the insulator crimp. Splice/solder the 20-gauge wire to the power wires. The power wires are 18-gauge (?) and will not fit into the Molex connector, so you need to use 20-gauge wire.

The first picture shows the Molex parts and crimpers.
The second picture shows the top caddy. You can see the wire from the radar poking through the hole just in front of the red (rear) fender. The right side cover is at the top of the picture
The third picture shows the Molex connector under the right-side cover. You are looking at the back side of the female connector which is part of the stock wiring. The male connector is plugged in to it and is behind it in the picture so you can't see it.
The fourth picture shows the radar attached to the docking hardware and the path of the wire

I do a lot of commuting and also traveling on roads so few weeks ago I bought INNOVV THIRDEYE. I thought this has to be some sort of gimmick but I will risk it and try it out. Well today I went out for a first short ride and I must say I am really pleasantly surprised. The damn thing is perfect. Build quality is really good and no false warnings or anything like that. At any moment I knew exactly what is going on behind me. It really is a safety gadget and it works as advertised

I took the plunge during Black Friday sales as I’d been contemplating buying these after seeing numerous reviews on YouTube. Thee install was very easy and I had it installed on a BMW R1250GSA in about 2hrs but I was taking time to make it as near as possible.
The unit works great and the lights a very bright.

The third Eye is an amazing product! I am blind on my left eye since i was 5, drive 25 years a motorcycle and overtaking was always an issue cause my side view to the left is less than for everyone else. Have blind spot mirrors but that is a drop of water on a hot plate. Have this system 2 weeks now i commute to work 170 km daily all year thru , works perfect in daylight and specially at night :-) . And it's easy to install even for me hahaha....

Product is a 100% TOP product !!! Innovv hat's off and many thanks.... Drive safe you all.....

Greetings from The Netherlands.

Best ThirdEYE BSD on the market!!!
Installed and operating within an hour with easy to follow instructions.
I found out what additional safety I had been missing out on for the past 50 years. What a difference in riding pleasure.

Fast delivery, good usage, easy to install. I am ordering to install for my friends in the group. It is a very good product. I recommend this brand.

Very impressed the the design, build quality & functionality. Simple to install and setup. Works a treat, very happy biker.

I was skeptical about adding another gadget to my bike, but the INNOVV ThirdEYE proved its worth on the very first ride. The alerts are timely and accurate, giving me that extra confidence when I'm on the highway. It's like having an extra set of eyes where you need them most. Highly recommend!