RC6 With Dashcam And ThirdEYE

Find all the information you need about RC6 with dashcam and thirdeye in here. This includes APP, manuals, firmware, FAQs, and video tutorials.

RC6 With Dashcan & ThirdEYE

How To Update Firmware:

1. Copy the firmware (INNOVV K6.bin) to the root of TF card.*8GB and 32GB TF cards should be formatted into FAT32 in advance.

2. Insert the TF card in the DVR then turn on the camera by long pressing the button, the red light will flash at low light, stop pressing the button and wait for a few moments till the updating finishes, the K6 will automatically turn on after the updating, and the firmware in the card will be deleted as well.

(*Important: the power should not be cut off during this step)

Play Store

Download INNOVV App from Play Store

Apple Store

Download INNOVV App from APP Store

Manual

Click the right side to download the manual

Manual

RC6 Firmware Version:

IK6.20231107.V1.0.01

Download

Changelog:

1. Support for 28 frames video selection.
2. Adjust gravity trigger sensitivity.

FAQ ThirdEYE Part

1.No lights come on after turning on the ignition, even though the wires are well connected.

1. Please check if the fuse is burned.

2. Please check that the wires are connected correctly and firmly. Make sure the input voltage is between 9V and 16V with 0.5A. The red wires must connect to the ACC, while the black wire connects to the negative pole of the battery.

2.Only power indicator is on, the alert light is off.

Please check that the connection between the control box and the radar detector is stable.

3. The DVR is not working after motorcycle ignition is on.

Please check that the connection between the control box and the radar detector is stable. Please also check that the connecting cable is in good condition.

4.No warning alert sound.

Please confirm that the buzzer is not blocked on the control box.

5.The power indicator stays on after the ignition is turned off.

Please check that the red cable is connected correctly. The power must be off when the key is locked.

6.The blue light stays on after the ignition is turned off.

Please check that the red wire is connected to the ACC properly.

FAQ Dashcam Part

1.The camera is shaking during riding, and the videos are jittery. 

Please check if the camera is parallel to the ground and confirm if the screws are tightened enough.

2. The DVR mount get loose even though the screws are tightened. 

Please add a silicon plate to strengthen the resistance between the bracket and handle bar.

3.The video is blurry.

Please check if the lenses are clean without any finger marks, dust or other smudges, and wipe the lenses with dust-free cloth.

4.The K6 can not be turned on, or shut down automatically.

Please check if the power supply is with DC 5V / 2A.

5. The K6 fails to record and the red light is flashing.

Please check if the TF card is inserted properly or select another TF card and try again.

6. The K6 Wi-Fi can not be found.

Please check whether the green light on the DVR is blinking or not, please press the button twice for a short time to activate the Wi-Fi if you find the green light is not on.

7. Forget the password of the INNOVV Wi-Fi.

Please reset the DVR to default setting. The default password is 12345678.

8. There is no audio in the video.

1. Please check if the microphone is off in the App settings.

2. Please check if the microphone input hole in the DVR is blocked or not.

9. Video frozen when it is played or downloaded in the App

1. The distance between your phone and the camera should be within 2m, and be sure there is no obstacle or interference sources around.

2. You are suggested to operate the App on a mainstream mobile phone to get a better experience.