150 PSI High-Pressure Technology

The air pump has a maximum pressure limit of 150PSI. This high-pressure capability ensures quick and efficient inflation, providing peace of mind for users who need reliable performance in various situations.

60-Second Rapid Inflation

Use our air pump for quick inflation. It only takes one minute to inflate a 235/45 R18 tire from 28 to 38PSI. It can quickly inflate your tire.

Five Scene Modes Available For Selection

We have 5 modes, each of which is equipped with a certain pressure range, allowing you to quickly make the corresponding choice. At the same time, we also have 4 different pressure calculation methods, namely PSI, Bar, Kpa, kg/cm², It can accommodate various pressure measurement units, providing greater convenience for everyone.

Inflate. Drive. Conquer.

INNOVV P1 Portable Tire Inflator delivers speed, convenience, and reliability — all in a compact design tailored for passionate riders.

Watch It in Action

Trusted by Riders Worldwide

Free Shipping
2-Year Warranty
30-Day Return

Tech Specs

General
General
Basic Information

- Model No: P1
- Input Voltage: 5V2A
- Power Bank Output Voltage: 5V2A
- Battery Capacity: 6000mAh
- Charging Time: 3-5 hours
- Battery Life: <22 minutes
- Noise Level: 78db
- Working Voltage: 11.1V
- Max Power Consumption: 60W
- Max Current: <6A
- Max Air Flow: 20L/min
- LED Lumens: 20LM
- Max Inflating Pressure: 150PSI
- Measurement Accuracy: +1.5PSI
- Pressure Units: PSl, Bar, kPa, KG/cm²
- Inflation Hose Length: 350mm士10mm
- Working Temperature: -20℃~60℃
- Product Color: Black
- Product Size: 170mm*90mm*60mm
- Main Unit Weight: 700g

What's in the Box?

  • Air Pump

  • Type C Cable

  • Manual

  • Mount For Helmet Set

FAQs

Please read our After-Sale page to find out more.

Does the inflator stop automatically after inflation?

Yes, once the preset tire pressure is reached, the P1 automatically stops to prevent over-inflation.

How do I change the pressure units?

Press and hold the mode switch button for 2 seconds to cycle through Bar, Psi, kPa, and kg/cm².

Can I use the P1 as a power bank?

Yes, the P1 functions as a power bank. Just connect your device via the USB port. Note: inflation is disabled while in power bank mode.

How long does the battery last and how do I recharge it?

The battery Inflatable endurance lasts up to 22 minutes per full charge. Use a 5V/2A power adapter and the included Type-C cable to recharge. Charging time is approximately 3–5 hours.

What should I do if the inflator overheats?

Inflation generates heat. It’s recommended to stop the device for 15 minutes after 5 minutes of use to allow it to cool down.

Can I use the flashlight or SOS light independently?

Yes. The LED button toggles between white light, slow flashing red, fast flashing red, and off.

How do I switch between different inflation modes?

Short press the mode switch button to toggle between Car, Motorcycle, Bicycle, Ball, and Custom modes.

Why haven't I received the email about the order?

Please check the spam email or the email address where you placed the order.
You will receive email notifications when your order is successfully placed and shipped.

Why did I only receive part of product for my order?

Since accessories and equipment will be shipped from the most suitable warehouse and logistics center, your order may be split into two packages to ship.
You can check the logistics information for both packages in your order.

Didn’t find your answer?

Don't hestitate to contact us

Customer Reviews

Based on 33 reviews
88%
(29)
12%
(4)
0%
(0)
0%
(0)
0%
(0)
M
Mike
Apart from some noise while charging this is a great little device

Apart from some noise while charging this is a great little device. I have used it on both my Bike and Car and it saves time and Muscle ache.

D
Denis
Vespa tyre inflator

Just what I need to take with me on my Vespa. I have a puncture repair kit, and now a package that gives me a light and a tyre inflator. Also doubles up as a power bank.

S
Sara Cunha
Reliable and Practical, but Heats Up with Heavy Use

I tested the INNOVV P1 for the first time on a very hot day, with the temperature close to 30 °C. I was pleasantly surprised with its performance: I managed to inflate 7 tyres in a row without any issues. However, by the 8th tyre the inflator had become quite hot (despite the cooling system), so I had to wait around 30 minutes for it to cool down before finishing the last one. Overall, I’m satisfied with the product — it does its job well, is practical and efficient, though it’s worth keeping in mind the heating when used intensively.

T
Terence Langendoen
Great sturdy product it appears built from aluminium which is big plus

Great sturdy product it appears built from aluminium which is big plus...for mitigating against potential drops or being stepped on. It comes with everything you need to inflate a motorcycle and more.

A
Anonymous
parfait, produit conforme et rapidité

service et produit impeccable